HEAVY-DUTY STEERING KIT - SYNERGY ('00-'02, 4WD)

Item #: PPM-8525-02
Qty.
  • About This Product
  • Reviews

Description

Help eliminate the "tie rod flop" and tighten up the steering in your '00-'02 4WD Dodge Ram truck with this Synergy Heavy-Duty Steering Kit.

This Heavy Duty steering kit is a larger and stronger, bolt-on replacement for the stock steering. No drilling or reaming of the knuckles is required. It uses the updated factory T-style steering design to eliminate toe-change caused by Y-style steering. Using the factory T-style steering design also results in no induced bump steer inherent with most aftermarket "cross over" steering kits. The Tie Rod also uses low misalignment "wobble stopper" Tie Rod End Boots to prevent unwanted Tie Rod "flop" which results in a dead spot in the steering when changing direction. The complete kit includes a heavy duty Drag Link, heavy duty Tie Rod, and Steering Stabilizer Mount Kit for use with stock or aftermarket steering stabilizers using a 1/2" mounting bolt.

With this kit you get this long list of features:

Drag Link

  • Drag Link is bent to clear factory axle brackets and is compatible from stock to 4" lifted vehicles. (Vehicles over 6" of lift will require a drop pitman arm for compatibility)
  • Drag Link is made from 1-1/2" solid 1018 bar.
  • Synergy Double Adjuster Sleeve allows adjustment of Drag Link length without removing it from the vehicle.
  • Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance.
  • 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools.
  • Drag Link comes with Synergy HD metal on metal tie rod ends, 94-99 Trucks: 4136-L and 4160-L (Pitman arm side is 4136-L).
Tie Rod

  • Tie Rod is bent to clear sway bar mounts and steering pitman arm.
  • Provides 2" of additional ground clearance from stock tie rod.
  • Made from 1-1/2" x .188 wall 4130 Chromoly and Heat Treated for maximum strength - (200%) stronger than stock tie rod.
  • Synergy Double Adjuster Sleeve allows adjustment of tie rod length without removing it from the vehicle.
  • Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance.
  • 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools.
  • Tie Rod comes with Synergy HD metal on metal tie rod ends, 4136-L.
  • Tie rod ends include low misalignment "wobble stopper" grease boots to prevent unwanted Tie Rod "flop".
Tie Rod Stabilizer Clamp

  • Fabricated clamp to retain factory or aftermarket stabilizer with 1/2" mounting bolt
Kit includes:

  • 8567-02 Drag Link
  • 8568-02 Tie Rod
  • 8568-10 Tie Rod Stabilizer Clamp & Drop Bracket
  • 8525-02 Stainless Steel Clamp
STEERING DAMPER SOLD SEPARATELY

Install and Tech Information

Videos

Close