ADJUSTABLE TRACK BAR KIT - SYNERGY MANUFACTURING ('94-'02, 2500/3500, 4WD)

Item #: PPM-TBCK-0002
Qty.
  • About This Product
  • Reviews

Description


Dodge Ram Synergy Suspension
A cause of severe front axle vibration on the '94-'02 Dodge Ram 2500 and 3500 4X4 trucks can be traced to the track bar. Get it under control with this Synergy Manufacturing Track Bar Conversion Kit.

  • Retains factory track bar mounting bolts & hardware
  • Bent to clear most aftermarket differential covers
  • Made from high quality 1-3/8" 1045 solid tubing
  • Allows centering of front axle when running a suspension lift
NOTE: The trackbar can be adjusted from 38.625" (.25" shorter than stock) to 39.438". This allows the track bar to be used when lowering trucks for race applications up 3" lower than factory specs and lifted applications up to 4.5" over factory specs.

Reviews

Write a review
This is a Solid Kit. Will require drilling and possibly minor grinding.
Apr 22, 2016  |  By Daniel Bryant
This kit tightened up the steering on my 99 cummins 4x4. This kit will require you to drill 2 holes in the cross member. I was able to use a large corded drill without clearance issues. You may need to use an angle grinder to clean up welds on your factory truck's brackets. I recommend this kit if you have access to these basic tools.

Install and Tech Information

Videos

Close