SEAT MOTOR - REAR - UP/DOWN ADJUSTMENT ('03-'09, 2500/3500 & '02-'05, 1500)

Item #: SEAT-DOD2
Qty.
  • About This Product
  • Reviews
  • Install And Tech Information

Description

'03-'09 Dodge Ram 2500/3500 and '02-'05 Ram 1500 rear up/down adjustment seat motor.

Also works with the 2006 to 2008 Ram 1500 Mega Cab trucks.

Reviews

Write a review
Instructions so good it felt like I'd done this before.
Apr 10, 2021  |  By Josh Scadden
I purchased both the front and the rear motors. I was planning on replacing the whole seat undercarriage so all three motors would be new, but after finding out there ate multiple undercarriages used and mine was the expensive one ($500+) I decided to go this route. I'm very happy I did. I read the instructions a couple of times and went to work. It took me longer to get the seat out of the truck than it took to replace both the motors. The whole process was done before noon. The motors fit perfectly and works perfectly. I purchased two expansion pins in case there was an issue with the factory ones, and because the instructions are so good, I now have a pair of 1/4 inch expansion pins that are going to rattle around in my spare parts for the next forever. This was definitely the way to go. If I ever come across another set of bad motors again, I'll be buying the replacements from here. Now my only problem is figuring out what to do with the rest of the weekend...


Great service
Dec 23, 2017  |  By Michaela olivieri
Our parts arrived in a timely mamner and were exactly what we needed. We will definitley be placing more orders with genos


seat motor
Aug 19, 2017  |  By Mark Kukuchek
Works as described,. Instructions are good,Not a simple project but doable for most DIY's. A video of the install would be good.


vertical seat motor
Jun 14, 2017  |  By dennis boiteau
perfect replacement. I found it easier to replace shaft from old unit.


Great Product
Mar 23, 2017  |  By Charles A Howard
Great support from the vendor, answered my questions and resolved my confusion that mistook "Tube Nut" for the factory Round Nut, but actually referred to the Cylinder/Tube "nut" with the forked end to connect to the seat lifter and surrounds the worm shaft. Contrary to the Instructions I found an 8" C-Clamp worked much better and successfully to remove and re-install the Roll Pin that secures the motor to its bracket. (Flat end on the Roll Pin and Screwed end on the outside of the seat frame). I couldn't find enough room to use a Pin and hammer to beat it out per the instructions. Removing the Seat is time consuming as all the seats must be unfastened to allow access to the center/jump seat bolts to free the Drivers seat, also complicated by the seat belt sensor wiring the runs to the Passenger seat. Its definitely a time consuming but very rewarding project thanks to well illustrated instructions and excellent support.

Install and Tech Information



Download '03-'08 Ram Seat Motor Replacement.pdf

Videos

Close