POWER STEERING UPGRADE KIT - BORGESON ('80-'93, D250/D350 2WD ONLY! ) NO CORE CHARGE

Item #: BORG-999068
Qty.
  • About This Product
  • Reviews

Description


Power steering upgrade kit for 1980-1993 Dodge Ram 2WD D250/D350 pickups.
This kit includes Borgeson street and performance 12.7:1 quick ratio steering box, replacement steering shaft and rag joint coupler.
Fits original hoses and pitman arm.
All new components, not remanufactured.

SPECIFICATIONS:
Input Shaft: 3/4"-30 Spline
Pitman Shaft: 1-1/4" GM with 32 Splines and 4 Master Splines
Pressure Port: M18 X 1.5 O-Ring
Return Port: M16 X 1.5 O-Ring
Maximum Pressure: 1450 PSI Maximum Operating Pressure, 1100-1250 Optimal
Flow Rate: 2.5-3.0 GPM Flow Rate Recommended. If you are using a high flow pump like the Borgeson 800328, you will need to install an aftermarket power steering fluid cooler to help dissipate the heat generated by the extra flow.

All Borgeson power steering boxes are assembled and tested in the USA from globally sourced components and have a 3 year manufacturer's warranty.

Not compatible with 950 and 951 Borgeson steering shafts.

TECH TIP Remove the pitman arm before bleeding the system. Removing the pitman arm allows for full turn to turn allowing you to completely bleed air from the system.

2 WHEEL DRIVE ONLY WILL NOT WORK WITH 4 WHEEL DRIVE TRUCKS.

NO CORE CHARGE. WE DO NOT NEED THE CORE BACK.

************
IMPORTANT! TECHNIQUE TO PROPERLY CENTER YOUR NEW GEAR BOX
Make sure that any gear box that is installed is installed properly centered. Turn the input shaft all the way to one direction, then count turns to the full stop at the other direction. Split this number in half then turn the input shaft back to find the proper center. Once true center is found, make a paint pen mark at the top of the sector shaft that will still be visible once the pitman ram is installed, then make another line just above it on the gear box body. After the gear box is installed and the alignment completed, the lines must still line up perfectly. If not, the gear box is no longer centered and will wander on the road.
************

Install and Tech Information

Videos

FAQs

Close