- About This Product
- Reviews
Description
When driving at night in your '06-'09 Dodge Ram truck, have you noticed the increased lighting brightness when you pull back the switch to go from low beams to high beams? In the transition you activate a momentary switch position that illuminates both the high and low headlight beams. Likely you've driven and tried to keep the switch in the momentary position, but the left hand tires quickly and the headlight switch is not designed for a continuous amperage draw.No doubt it would be nice to enjoy the vision benefits of the combination high and low beam patterns. The answer: Brite Box!
The Brite Box module plugs right into the Dodge Ram's existing OEM wiring harness and allows simultaneous operation of the high and low beam headlights without placing any additional loads on the vehicle's stock headlight switches or wiring.
NOTE: Must be used with stock Halogen wattage bulbs.
NOTE: Due to Canadian motor vehicle regulations, this product is not available to Canadian customers.
Reviews
Write a reviewJust as advertised...
Aug 11, 2017 | By Bill Plaisance
Works good. Instructions were a little confusing if you have a gasser like me because it seems like this system was more-less designed for a diesel with two batteries because each box wires to the battery on the same side so you have to use the wire, butt-connectors and heat-shrink to make the passenger side wire long enough to run to the battery on the other side if you don't have a diesel but other than that, it works as advertised. Keeps the lowbeams on when you hit the brights. Seems to be made in good quality.
Install and Tech Information
Videos
