- About This Product
- Install And Tech Information
DescriptionIf you have followed the story of the OEM fuel transfer pump for truck model years '98.5-'02, you know that the original and subsequent replacement parts from Dodge, Cummins and other suppliers that are, at best, marginal. Add to this dilemma the fact that your expensive VP-44 fuel injection pump needs fuel from the transfer pump for cooling and you can understand that selling and choosing a reliable fuel transfer pump is very important.
The folks at FASS offer a complete line of high-performance fuel transfer pumps and fuel filter kits. The FASS engineers realized that some customers did not need the full benefits of the more expensive FASS high-performance systems, not to mention the added installation time that is required. In the fall of 2008, they introduced a direct replacement fuel transfer pump for '98.5-'02 truck owners.
The Dodge Replacement Pump (DRP) gives you the dependability of a FASS product without the cost of a complete system. Additional benefits: flow is increased by 33%, installation can be accomplished in less than 30 minutes, and a four-year warranty.
The DRP is an aftermarket, replacement, lift-pump that mounts in the stock pump location. It utilizes the factory wiring harness for power. You will need to change the stock steel fuel line from the pump to the filter housing with the rubber fuel line and fittings that are included in the kit.
NOTE: The DRP is designed as a stock replacement pump. It will not meet the needs of performance applications.
NOTE: The DRP is not compatible with waste vegetable oil (WVO) or BioDiesel fuels.
ReviewsWrite a review
Nov 23, 2016 | By Chris MacNeil
Got myself a second 1999 Dodge with a Cummins so I needed a lift pump. For me its easy after making up my mind on what I want or need., If Geno's has it then so will I
Great Replacement Pump
Nov 12, 2016 | By Marcus
Mine holds 17-19 psi idle, cruising around town it'll be 15-16 psi and up to highway speeds it'll be 13-14 psi. Great pump for anyone looking for a stock replacement. I also have the 1/2" line from the filter to VP44. I am running an old Edge EZ timing box as well, pump works great. Only time will tell. I would recommend it.
Oct 2, 2016 | By Jonathan Gunn
Best replacement fuel pump on the market. I use it with the Vulcan relocate kit from Geno's on all my trucks.
Apr 15, 2016 | By Jon Gunn
Works great. I installed this on a 98.5 and used the Vulcan Relocation Kit with it. Mounted it on the frame under cab and no more problems!
Oct 4, 2015 | By Jim Murray
If you mount in the stock position on the engine you may find that the wires to unit will vibrate enough to disconnect inside the insulation. I had to remount on the frame after repairing the wires. Great units better than stock
Install and Tech Information
FASS DRP 02 Installation Instructions.pdf