Item #: CUP-HOLDER-03
  • About This Product
  • Reviews
  • Install And Tech Information
  • Videos


Increase the storage capacity of the center console of your Dodge Ram truck and help avoid messy liquid spills in the interior with our handy center console cup holder. It is installed in minutes to the existing console.

Our matte finish Dodge truck cup holder is form fitted to the inside diameters of the console and is designed to work with either automatic or manual transmission equipped trucks. This cup holder only works with the standard interiors which have the 40/20/40, split-bench seats with a fold-down center console.

Using a single self-tapping screw included with the cup holder, it attaches to the inside of the console. Once installed you will find that the thickness of the cup holder does not allow the console lid to latch properly, but this can be easily fixed. (See note below.)

Cup wells are 4" deep. Upper diameter: 3-3/4". Lower diameter: 2-3/4". Has slot for coffee mug handle. The side pocket is the perfect dimension to hold your cell phone and/or wallet

NOTE: Does not fit trucks with Captain's chairs and the big factory center console.

NOTE: The latch closure in the '03-'09 trucks can be adjusted using shims to increase the depth of the latch mechanism in the lid. Instructions and hardware are included with the cup holder.

NOTE: NOTE: Some customers have reported interference with the G56 shifter hitting the cup holder, but most G56 owners report no interference at all. This is a product with helpful reviews... take a moment to read them, especially if you have a G56"


Write a review
Very convenient
Oct 23, 2015  |  By Erik Iversen
Installed on my 06 2500. Great idea. Very convenient. Love the extra cup holders plus that they are much closer than factory cup holders. Good instructions easy install. Installation recommends to "disengage" the vertical position lock. Do it, I did not at first and the lid locks shut sometimes and is a pain in the ass to jimmy open again. My only objections is it will not latch as smoothly and you need make sure it does, I have had the lid open in the vertical position a couple times. And lastly it should really say that seat is no longer really usable. Everything still functions the same but a passenger wouldn't be able to sit comfortably with it in their back or could even break it off.
Owner Response:Thank you for the feedback. We will be adding a picture that shows the center console in the upright position.

Center console
Oct 1, 2016  |  By Travis
Excellent addition a lot more storage spam for drinks

Works great!
Nov 6, 2016  |  By clint
Fits real well, but you need to follow the instructions for shimming the latch. Cup holders work great. Fast service and shipping!

cup holder
Dec 18, 2016  |  By Paul Odlin
the cup holder is a great product..Ialso bought one for my 2001 ram many years ago.Afew months ago I purchased a wheel skin steering wheel cover.this is a great product.i really like the feel and looks.Great products.

great item
Jan 2, 2017  |  By DOUG
Easy to install

Cup holder
Jan 3, 2017  |  By John Hawkins
Great addition for the console. Installed easily

Works great
Jan 20, 2017  |  By Todd
I got the cup holder for my 08 Megacab. It fits well and looks nice. I did have to do the spacers to lower the latch but it comes with the needs parts and info. Super happy with it!

works great
Feb 6, 2017  |  By Cody
cup holders are a good size for everything from pop can to yeti. Install was simple, fit was pretty good.

Mar 22, 2017  |  By Bear
Wonderful addition to your truck. It'll hold an iPhone 7 plus and a Yeti can koozie. Nailed it.

Every Dodge needs this
Apr 21, 2017  |  By Randy
What a game changer love this cup holder

04 cup holder
May 8, 2017  |  By Dave Myers
Works great! Does ok as I have the nv5600 manual shift. Fit great and be sure to follow the instructions about latch adjustments. I am very pleased that Geno's had this part for a great price! Thanks Geno's for the popcorn! Was a great unexpected treat!

Best cupholder hands down
May 10, 2017  |  By Kaleb Smart
If ur dodge came with the sub par floor cup holders or the flip down style this is for you. This solves all issues and is versatile enough to fit a 44oz cup to a 12 ounce can with ease. Buy it you wont regret it.

Cup holder
May 21, 2017  |  By Aldo Acevedo
This product is fantastic! It solved my issue with space that I lost from installing a double din radio. The cup holders are deep which I love. Overall super satisfied wish I knew about this earlier.

Ram cup holder
Jun 8, 2017  |  By sal
Great product..Great service..quick ship..easy transaction..thx Geno's garage

best add on ever
Jun 11, 2017  |  By Alvaro castro
best add on to my truck 06 mega cab Just found this about a week ago I love it nice fit grate size 10x better than the stock cup holder and with the added hardware makes a perfect fit

Cupholder Dodge Ram
Jun 29, 2017  |  By John P
Center console cup holder for 2006, 2500 Dodge Ram 6 speed manual tranny: PROS: Cup holder works as advertised. CONS: Expensive! Somebody is making a killing on selling this piece of plastic. OEM gearshift position in top gear comes very very close touching cup holder. I think could have been designed smaller and still kept form , fit and function the same. Cost & better design issues, I would only give this part an average rating.

Easy install
Aug 9, 2017  |  By Jon
Product was as described easy install directions were very descriptive does not interfere with changing gears

Geno's Cupholder
Aug 18, 2017  |  By Phil Andrews
We've had these on Three of our trucks so far and they're the most used accessory for the interior. AAAA++++

Awesome product
Sep 5, 2017  |  By Jason
Easy to install, great quality, looks like factory equipment. Genos was great fast delivery, I will definitely order from you again

Great cup holder
Sep 9, 2017  |  By Bruce Fagan
Cup holder works great.

Works Great
Sep 15, 2017  |  By Carl Harris
Only thing I was worried about was shifting the six speed. No problem. Unless you like wrapping your fist around the shifter, I can't see having any trouble.

Cup holder
Sep 16, 2017  |  By JOSH
This thing is awesome! Perfect for a drink wallet and cell phone. Looks pretty good 2!

cup holders 2010 dodge
Oct 20, 2017  |  By alex
I seen this product on motorcity mechanic (you tube chanel) iThis product fits just as discribed... im very happy with it.

Great Product
Nov 7, 2017  |  By Howard
The cup holder was exactly what I needed. I twas exactly as ordered and ease of installation was a snap. Would recommend this product to a friend.

Functional but clunky
Nov 14, 2017  |  By Blake Lenz
I had one on my old 99 and loved it! This one for the 03 model is a little clunky, reason being with the latch properly shimmer like they require the latch is too close to the mold making it hard to open also difficult to close without slamming it. But still very functional as far as the cup holders go.

Dec 13, 2017  |  By Kyle
Looks close to original equipment. Only complaint i have is either my console hangs down lower or the plastic around the bottom needs to be a little shorter making the tray not want to sit flush and the lid is harder to close

Apr 4, 2018  |  By Jeff Seagroves
Fits my 2005 Ram Rumblebee perfectly. Took about 20 minutes total to adjust the lid with shims and get it all put together. Exactly what i was looking for.

May 15, 2018  |  By David Crane
Exact fit. Good quality. A worthwhile addition.

Not for Manual Trans
Sep 13, 2018  |  By Henry Leech
I have a 2012 Ram with a G56 6-speed transmission. I had ordered the 13-18 cup holder, but it didn't fit. I called customer service and they said this one would fit both auto and manual transmission types. Well it looks good until you shift into 6th then it smashes the cup.

May 6, 2020  |  By Brandon
Don't know why I waited so long to do this mod. Have a 2007 3500 with the G56 Manual . Plenty of room to shift. One suggestion would be to include 6 washers and longer screws. I have to push the lid down hard to get it to lock. Customer service is phenomenal

Awesome piece
Mar 23, 2021  |  By John Hartley
Driving a single cab I'm already extremely limited on storage space. My only regret with this purchase was buying it sooner. The shipping was fast and the product fits perfectly. Clearly written directions and hardware included. Thanks Genos

Awesome product
Mar 6, 2022  |  By Willie Graham
I installed this in a 2008 Ram 2500 with a 6 speed. It fit great. It is a little close to the shifter when in 6th gear, but it works. Might have to add one more shim to get it to close a little better. All in all, a great product. Would defiantly recommend.

Works great highly recommend
Jun 29, 2023  |  By Zac Edwards
This cup holder is great now I don't have to reach for my coffee anymore install was super easy only took about 20 min Geno's Garage and staff have the best customer service and great quality products I highly recommend them for all your truck needs I am a customer for life thanks Geno's staff

Pleased with it
Aug 19, 2023  |  By Edward
I just received it today and installed it If you are Easley Frustrated lol take your time It went fairly easy and didn't take very long to get it finished Only thing is it's a little harder to get to the latch to oen it now but not Terrible Over All I would Buy another one if I needed to


Center console cupholder installation: