POWER STEERING GEAR BOX - PLEWS & EDELMANN ('89-'93 D/W 150/250/350)

Description

Replacement power steering gear box by Plews & Edelmann.

APPLICATIONS:
1989-1993 Dodge Ram D/W 250/350 5.9L Cummins
1989-1993 Dodge Ram D/W 150

• Manufactured to meet or exceed OE specifications for form, fit, and function.

• Every Plews & Edelmann steering gear box is made with 100% completely new components - nothing is used or rebuilt.

• Re-engineered design addresses traditional OE flaws and helps prevent premature, repeated failures.

• A Designated Numeric Asset (DNA) identification number is etched into the part, which verifies its authenticity and corresponds to an individualized test inspection report that is included with the product to confirm its level of quality.

Note: When replacing the power steering pump, steering box or hoses, it is mandatory to flush the power steering system. Failure to do so will result in damage to these parts and void the manufacturer warranty. Be sure that the front end is off of the ground before doing this. Typically you will need 3 quarts of fluid to refill the system.

NO CORE CHARGE and NO CORE RETURN

Plews & Edelmann Part Number 3016

************
IMPORTANT! TECHNIQUE TO PROPERLY CENTER YOUR NEW GEAR BOX
Make sure that any gear box that is installed is installed properly centered. Turn the input shaft all the way to one direction, then count turns to the full stop at the other direction. Split this number in half then turn the input shaft back to find the proper center. Once true center is found, make a paint pen mark at the top of the sector shaft that will still be visible once the pitman ram is installed, then make another line just above it on the gear box body. After the gear box is installed and the alignment completed, the lines must still line up perfectly. If not, the gear box is no longer centered and will wander on the road.
************

Reviews

Be the first to write a review

Install and Tech Information

Videos

FAQs